Osram Phase Cut Dimmable OT FIT 150/220-240/24 PC LED Driver
The Osram Phase Cut Dimmable OT FIT 150/220-240/24 PC LED Driver is a 150W constant-voltage driver from Osram. It converts 220–240V mains to a regulated 24.2V DC output intended for 24V LED lighting systems.
Formally restrained, the unit has a slim, rectangular light-grey plastic housing with technical specification printing on the top face. Push-in terminal blocks sit at one end and colour-coded output terminals make connection and circuit separation straightforward.
The casing is moulded plastic with four integrated mounting holes for secure flat-surface fixing. Wiring and regulatory information are printed on the top surface; the unit is rated for a maximum casing temperature (tc) of 80°C and an ambient range of −20°C to +45°C.
Electrically this is a constant-voltage supply rated 150W with a nominal 24.2V DC output. Secondary outputs are marked with red (LED+) and black (LED−) terminals for multiple 24V LED loads. The driver carries SELV and common international marks and is explicitly compatible with trailing-edge dimmers for brightness control.
Installation uses separated primary (L, N, PE) and secondary push-in terminals; wire strip length is specified at 7–8mm and suitable conductor cross-sections are shown on the casing. The unit is IP20, intended for indoor, dry-location installation. Lamps are not supplied. Warranty varies between 3–10 years depending on the product.
Lighting Design Online recommends this Osram driver when you need a compact, clearly specified 24V supply for LED strips or 24V luminaires. The printed wiring diagrams, push-in terminals and dimmer compatibility reduce on-site uncertainty, while our project-focused guidance ensures the specification delivers the right, durable outcome for the scheme.
The Osram Phase Cut Dimmable OT FIT 150/220-240/24 PC LED Driver is a 150W constant-voltage driver from Osram. It converts 220–240V mains to a regulated 24.2V DC output intended for 24V LED lighting systems.
Formally restrained, the unit has a slim, rectangular light-grey plastic housing with technical specification printing on the top face. Push-in terminal blocks sit at one end and colour-coded output terminals make connection and circuit separation straightforward.
The casing is moulded plastic with four integrated mounting holes for secure flat-surface fixing. Wiring and regulatory information are printed on the top surface; the unit is rated for a maximum casing temperature (tc) of 80°C and an ambient range of −20°C to +45°C.
Electrically this is a constant-voltage supply rated 150W with a nominal 24.2V DC output. Secondary outputs are marked with red (LED+) and black (LED−) terminals for multiple 24V LED loads. The driver carries SELV and common international marks and is explicitly compatible with trailing-edge dimmers for brightness control.
Installation uses separated primary (L, N, PE) and secondary push-in terminals; wire strip length is specified at 7–8mm and suitable conductor cross-sections are shown on the casing. The unit is IP20, intended for indoor, dry-location installation. Lamps are not supplied. Warranty varies between 3–10 years depending on the product.
Lighting Design Online recommends this Osram driver when you need a compact, clearly specified 24V supply for LED strips or 24V luminaires. The printed wiring diagrams, push-in terminals and dimmer compatibility reduce on-site uncertainty, while our project-focused guidance ensures the specification delivers the right, durable outcome for the scheme.
Original: $97.82
-70%$97.82
$29.35Description
The Osram Phase Cut Dimmable OT FIT 150/220-240/24 PC LED Driver is a 150W constant-voltage driver from Osram. It converts 220–240V mains to a regulated 24.2V DC output intended for 24V LED lighting systems.
Formally restrained, the unit has a slim, rectangular light-grey plastic housing with technical specification printing on the top face. Push-in terminal blocks sit at one end and colour-coded output terminals make connection and circuit separation straightforward.
The casing is moulded plastic with four integrated mounting holes for secure flat-surface fixing. Wiring and regulatory information are printed on the top surface; the unit is rated for a maximum casing temperature (tc) of 80°C and an ambient range of −20°C to +45°C.
Electrically this is a constant-voltage supply rated 150W with a nominal 24.2V DC output. Secondary outputs are marked with red (LED+) and black (LED−) terminals for multiple 24V LED loads. The driver carries SELV and common international marks and is explicitly compatible with trailing-edge dimmers for brightness control.
Installation uses separated primary (L, N, PE) and secondary push-in terminals; wire strip length is specified at 7–8mm and suitable conductor cross-sections are shown on the casing. The unit is IP20, intended for indoor, dry-location installation. Lamps are not supplied. Warranty varies between 3–10 years depending on the product.
Lighting Design Online recommends this Osram driver when you need a compact, clearly specified 24V supply for LED strips or 24V luminaires. The printed wiring diagrams, push-in terminals and dimmer compatibility reduce on-site uncertainty, while our project-focused guidance ensures the specification delivers the right, durable outcome for the scheme.